The MiSTer FPGA Digital IO Board v1.2 provides the following features, a dedicated power switch to turn the unit on and off with over-voltage protection, a 3.5mm audio jack for ADC In (Tape Input) a separate ADC-In board is not required, 3.5mm Mini-TOSLINK & Digital TOSLINK Connectors, a secondary microSD card slot the functionality depends upon the core being used, a fan speed control jumper providing 3.3 volts or 5 volts, three status LEDs (red, yellow, green), three large push buttons providing system reset, on screen display menu and game reset, an expansion connector in the form of a USB 3.0 connector however this is not for standard USB devices.
The MiSTer I/O Digital Board v1.2 includes a jumper for 3.3v or IO selection on the User IO port. Selecting IO provides support for Sega Mega Drive / Genesis / Master System game pads using a SNAC adapter board.
Once assembled each MiSTer FPGA Digital IO board is inspected under a microscope to ensure no solder bridges are present, the completed version 1.2 Digital IO board is fully cleaned in an ultrasonic bath to remove any flux residue left over from assembly, once clean the IO board is fully tested on a live MiSTer setup. Each IO board uses high quality branded components including Samsung Electro-Mechanics and Microchip Technology.
SW3 on the DE10-Nano board must be set to the ON position for the Digital IO board to function.
✅ Suitable For Terasic DE10-Nano FPGA Board
✅ Includes Quiet Fan or Noctua NF-A4x10 Fan
✅ Built-In On / Off Power Switch
✅ Mini-TOSLINK & Digital TOSLINK Connector
✅ 3.5mm For ADC In (Tape Input)
✅ 3 User Buttons & 3 Status LEDs
✅ Secondary MicroSD Slot
✅ User IO Port Connector
✅ Headers For External Push Buttons & LEDs
✅ DC to DC Power Cable Included
✅ Fully Assembled & Tested