Buy MiSTer FPGA Addons | Worldwide Shipping | Free UK Shipping | PayPal Accepted

USB Hub v2.1 For MiSTer


The USB hub add-on board allows for easy connection of up to seven USB devices to the MiSTer FPGA. Connect a keyboard, mouse, WiFi dongles, joysticks, gamepads and more, all while fitting neatly under the DE10 Nano.

(19 customer reviews)

7 in stock (can be backordered)

The USB Hub v2.1 board provides 7 USB ports for the MiSTer FPGA, if you need to connect multiple USB devices this is a very useful add-on board, offering a neat minimalist connection solution via the provided Micro USB Bracket Connector which connects directly into the header installed on the USB hub board and then via the right angled gold plated micro USB connector into the DE10 Nano board. A power splitter cable is also included along with four brass hex stand-offs.

The updated official MiSTer USB Hub v2.1 add-on board has the new VBUS control circuit installed, this additional protection IC is used for USB power cycling to help some USB devices reinitialise upon reset. Also present is an additional USB power only socket, this is marked PWR1 on the board and provides a powered only USB socket.

Each USB hub add on board for the MiSTer FPGA are checked under a microscope to ensure no solder bridges are present, the complete USB hub board is fully cleaned in an ultrasonic bath to remove any flux residue left over from assembly. Each USB hub board uses high quality branded components including KEMET and Samsung.

✅ Suitable For Terasic DE10-Nano FPGA Board
✅ Includes USB Hub Micro USB Bracket Connector
✅ Includes Power Splitter Lead & Brass Stand-offs
✅ Fully Assembled & Tested

  1. Garry Heather (verified owner)

    A simple solution to the problem of where to plug all those USB game controller receivers, WiFi dongles and in my case a USB powered TOSLINK to headphone amplifier to get audio from the digital IO board. The powered USB port has enough grunt on it to also power my portable LCD monitor (via a USB-A to USB-C cable) making a moderately portable solution that can be powered from one power supply that you could also buy from

  2. Nicolas C (verified owner)

    Hello, brought this USB Board as the last part of my MiSTer setup. It works perfectly, installation was easy and straight forward.

    Shipping was very fast, and well protected. Now that I have completed the MiSTer FPGA, I’ll go on and integrate it in a small appliance box.

    Thanks a lot for the efficiency.

  3. xwilliammeex (verified owner)

    Nat shipped this great piece to me in USA when others didn’t have it at all, and did so quickly, priced fairly, and even helped me with a spare part I needed on a prior order. This USB hub paired with the acrylic case and an IO board gives a nice, clean, pro look to your MiSTer stack!

  4. Andreas (verified owner)

    I received a fully working and easy to install USB board for my MiSTer FPGA. Thanks Nat for the support!

  5. Timothy Wald (verified owner)

    I purchased the USB Hub to use as part of a Mister build and I’ve been pleased with the high quality of the board. The power splitter provided is also of good quality. The order was process quickly and it arrived a few days later. I would recommend both the product and Mister FPGA site.

  6. Andrew A (verified owner)

    I would consider this item an essential purchase if you are planning to use multiple inputs that require USB. the modular design makes fitting together easy. The item arrived well packaged, well constructed and makes for a neater smaller footprint in the case rather than using an external hub.

  7. Ryan Williams (verified owner)

    Another quality product. Fantastic bit of kit. Delivered in perfect condition, well packaged, and it leaves a far tidier setup than using an OTG adapter to plug into an external powered USB hub. Comes with a splitter cable meaning that you only need one power cable. Fits neatly to the main board and is easy enough for even an idiot like me to fit. Top marks again.

  8. Morgan Jones (verified owner)

    Excellent quality, very well made and everything works exactly as it should. After initially deliberating between this or ‘going cheap’ and using an OTG hub, I have to say I’m really happy I chose to pay a little more and get the real deal. Highly recommended.


  9. sv.poster (verified owner)

    Nat is an excellent seller, sells a quality product! I recommend him to anybody who asks where to buy extensions for DE10-Nano.

  10. Sam Hartley (verified owner)

    This is a must have for your MiSTer FPGA.

    Really well put together, perfect fit and works great to add controllers, Bluetooth and WiFi adaptors, keyboard, mouse, etc.

    Great customer service and fast shipping.

  11. Jonathan Leech (verified owner)

    The board is well made and was super easy to fit with the brass spacers provided. It’s a brilliant addition to the MiSTer and much better than an external USB hub. I’ve ordered a few items from this site and they’ve all arrived quickly and securely packed. Nat was also brilliant answering questions that I had. Definitely recommended.

  12. David (verified owner)

    Such a clean way to add a heap of ports. Really appreciated that this included all necessary accessories. Well put together and packaged; full marks.

  13. Harvey Smith (verified owner)

    Great bit of kit and comes with all the required parts. This is now my go to website for MiSTer expansions.

  14. Damir Perec (verified owner)

    Great built quality USB Hub, excellent complete bundle and solution for USB connections. Fast shipping and great and secure packaging.

  15. James Boothby (verified owner)

    Nat builds the hubs to a very high standard and has provided great after sales support. I wouldn’t hesitate recommending him or purchasing from him again!

  16. Nadim Slim (verified owner)

    I could have got a cheaper hub from Amazon, but then I would have had a thing sitting out of the micro USB port. I preferred this solution since it puts the USB hub solidly underneath the DE10-Nano. It was very well built, and looks awesome in black.

  17. Cristian Vasilescu (verified owner)

    Nathan went above and beyond to provide an great product and service. Board was well packaged and all the accessories were provided in order to carry out a smooth install. Communication was excellent and he was more than happy to help out with a board which might have very well been damaged by myself without asking for further compensation and also very fast. Cannot recommend enough!

  18. David Clark (verified owner)

    It cost a little more than the £5 four port hub I was using but it’s a powered hub with 7 ports where the cheap one was not. Again an excellent product and very happy with how solidly it fits underneath with the included micro USB board adaptor so there is no strain on the rather delicate micro USB port on the DE10.

  19. Mike May (verified owner)

    Excellent very high quality products, I am a returning customer. Nathan is a pleasure to do business with and goes beyond my expectations of a seller. Item arrived well packaged, easy to fit and the 7 USB ports are powered with the DC Y-Splitter cable provided along with the Micro USB board that makes this a neat tidy solution for MiSTer, also the metal legs with spacers are included.

Add a review

Add a review

Your email address will not be published. Required fields are marked *

SKU: MiSTer-USB-Hub-v2-1 Category: Tags: ,
  • No products in the basket.
Join Waitlist Be notified when available to order, just leave your valid email address below.
Email Your email address will not be shared with anyone.