BlisSTer – Buy MiSTer Expansion Boards & Accessories

MiSTer FPGA DC Power Jumper

Nat — Thu, 06 Jul 2023 14:51:23 +0000

This neat little plug designed and produced by MiSTer Addons allows you to connect the Digital IO board and DE10-Nano DC power sockets together. The DC jumper is only used with the Digital IO board or BlisSTer board.

To use the built in Digital IO board power switch, simply link your power supply to the DC power socket on the Digital IO board. Next, connect the ends of the DC Power Jumper to the DE10-Nano’s DC power socket, and the USB Hub’s DC power socket. With this setup, you can conveniently manage power for the whole MiSTer stack using the on/off switch located on the Digital IO board.

✅ For Digital IO & BlisSTer Board Only
✅ Minimise Cable Clutter
✅ High Quality Connectors
✅ Male To Male DC Power Plugs

DC Power Jumper Compatibility:
✅ Terasic DE10-Nano
❌ Retro Remake MiSTer Pi
❌ QMTECH Cyclone V

BlisSTer Case Acrylic

Nat — Thu, 11 Mar 2021 18:48:01 +0000

The transparent BlisSTer case provides tough colourful protection for your MiSTer build, it is great for those who want to show off the PCB design and IC components, protect and admire!

This elegant case is designed for complete protection of your MiSTer. The top casing has ventilation slots allowing airflow from an IO board mounted fan, also three 3D printed button spacers allow for the use of the MiSTer IO boards user push buttons. Due to the transparent nature of the MiSTer case all the status LED’s are still visible through the casing, finally the MiSTer FPGA logo is laser engraved into the top plate.

The BlisSTer acrylic case is only suitable for the BlisSTer Revision 2 & 3 hubs, this case is not compatible with any other hubs including the older earlier BlisSTer board versions. The case is compatible with the real time clock board (RTC) and the audio tape input board (ADC In).

The BlisSTer case fitting kit includes all required parts to install the case onto your MiSTer build. The fitting kit contains eight brass stand-offs, eight screws, four silicone stick on anti-slip feet for the case base to keep your MiSTer stable and a replacement BlisSTer board power switch button cap.

✅ Only For BlisSTer Revision 2 & 3 Hubs
✅ Precision Laser Cut & Engraved
✅ All Ports Feature Laser Engraved Labels
✅ Manufactured From Perspex® Cast Acrylic
✅ Fitting Kit Included

BlisSTer Case Compatibility:
✅ Terasic DE10-Nano
❌ Retro Remake MiSTer Pi
❌ QMTECH Cyclone V

MiSTer USB Bridge Short Connectors

Nat — Mon, 10 Aug 2020 15:43:04 +0000

Perfect for connecting your MiSTer setup to a USB hub or BlisSTer board, the USB bridge connector offers a clean solution via two short Micro USB connectors, one plugs into the DE10-Nano’s Micro USB socket and the other plugs into the Micro USB socket on the BlisSTer board or official MiSTer USB Hub.

✅ Suitable For Official MiSTer USB Hubs
✅ Suitable For All BlisSTer Board Versions
✅ Short Micro USB Connectors

BlisSTer Hub Rev.3 For MiSTer

Nat — Sun, 26 Apr 2020 21:22:04 +0000

The BlisSTer Rev 3 board is an advanced peripheral add-on board for the MiSTer providing the following, a five port USB hub, an integrated on/off switch to control power to the MiSTer and additionally it has two low latency ports, these allow for the direct connection of Bliss-Box controller adapters to the MiSTer.

If you are looking for the ultimate MiSTer retro gaming experience you need low latency controller input while playing, coupled with using your favourite original console controllers, the BlisSTer board can offer this.

A wide variety of controllers are fully supported. The Compatibility List shows everything currently supported.

Improvements on the BlisSTer revision 3 boards include, status LEDS now indicating USB port status, integrated power module now protects for over ESD, USB VBUS control circuit is now implemented and the on/off power switch has been extended out an addition couple of mm for ease of use.

The BlisSTer board and the low latency API (LLAPI) are not officially supported by the MiSTer project. However BlisSTer is maintained and updated by members of the community, cores with LLAPI enabled can be downloaded here : https://github.com/MiSTer-LLAPI/LLAPI_folder_MiSTer

BlisSTer Firmware Update Instructions:
Updating BlisSTer Board Tutorial

BlisSTer Update Script:
https://github.com/MiSTer-LLAPI/Updater_script_MiSTer

✅ Built-In Power Switch
✅ 5 x USB 2.0 Sockets
✅ 2 x LLAPI Ports For Bliss-Box Adapter Cables
✅ Reset Buttons For Each Low Latency Port
✅ Integrated Power Protection Board
✅ DC to DC Power Cable Included
✅ MiSTer Uplink Cable Included
✅ Micro USB Bridge Included
✅ Mounting Standoffs Included

BlisSTer Hub Version 3 Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
❌ QMTECH Cyclone V