Accessories – Buy MiSTer Expansion Boards & Accessories

MT32-Pi USB Cable

Nat — Wed, 06 Aug 2025 10:49:47 +0000

When connecting the Raspberry Pi based MT32-Pi to the MiSTer via a USB 3.0 A-to-A cable, it’s important to use a short cable to ensure stable performance, this MT32-Pi USB 3.0 cable is the perfect choice.

Since I²C is not intended for long-distance transmission, longer cables can cause degradation due to capacitance or signal reflections. If you notice issues like a distorted OLED display or unreliable synth switching, the cable’s length or quality is likely the cause.

Each MT32-Pi USB cable has been individually tested on a live MT32-Pi setup to ensure flawless performance.

✅ USB 3.0 Cable
✅ High Quality USB Connectors
✅ Approximate Length 23cm

MT32-Pi USB Cable Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
✅ Retro Remake SuperStation One with SuperDock
✅ MiSTer Multisystem
✅ MiSTer Multisystem² Analogue
✅ QMTECH Cyclone V

DC Female to USB Type C Male Plug Power Adapter

Nat — Mon, 23 Sep 2024 15:56:13 +0000

If you are using the high-quality MiSTer Mean Well power supply or any other power supply with a DC barrel plug, this adapter cable allows you to connect it to the MiSTer Pi’s USB-C power input socket. Simply plug the USB-C end into the MiSTer Pi’s power input, and then connect the female DC socket on the adapter to the power supply’s DC barrel plug.

✅ Female DC Power Socket (5.5mm x 2.1mm)
✅ High Quality USB-C Connector
✅ Approximate Length 21cm

DC Female to USB Type C Adapter Compatibility:
✅ Retro Remake MiSTer Pi

MiSTer FPGA DC Power Jumper

Nat — Thu, 06 Jul 2023 14:51:23 +0000

This neat little plug designed and produced by MiSTer Addons allows you to connect the Digital IO board and DE10-Nano DC power sockets together. The DC jumper is only used with the Digital IO board or BlisSTer board.

To use the built in Digital IO board power switch, simply link your power supply to the DC power socket on the Digital IO board. Next, connect the ends of the DC Power Jumper to the DE10-Nano’s DC power socket, and the USB Hub’s DC power socket. With this setup, you can conveniently manage power for the whole MiSTer stack using the on/off switch located on the Digital IO board.

✅ For Digital IO & BlisSTer Board Only
✅ Minimise Cable Clutter
✅ High Quality Connectors
✅ Male To Male DC Power Plugs

DC Power Jumper Compatibility:
✅ Terasic DE10-Nano

MiSTer SNAC Extension Cable

Nat — Tue, 13 Dec 2022 11:10:38 +0000

When using a SNAC adapter with the MiSTer to avoid any strain on the User IO port, the recommended connection setup is to use a short male to female USB 3.0 extension cable between the SNAC adapter and the User Port on the MiSTer IO board.

This high quality USB 3.0 extension has a shielded cable for reliable performance and integrated moulded strain relief on both connectors providing excellent durability.

The MiSTer SNAC extension is compatible with SNAC boards (USB or HDMI) and PSX SNAC and SNAC IEC C64.

✅ High Quality Cable
✅ Approximate Length 22 cm

SNAC Extension Cable Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
✅ Retro Remake SuperStation One with SuperDock
✅ MiSTer Multisystem
✅ MiSTer Multisystem² Analogue
✅ QMTECH Cyclone V

UK Plug Mains Power Cable To IEC C13 Lead

Nat — Tue, 12 Jul 2022 10:23:35 +0000

A one meter long mains cable featuring an IEC C13 connector on one end and an 3 pin UK moulded plug on the other. This power lead transfers mains power from a UK mains socket to a device with an IEC inlet.

Designed for use with IEC C14 devices such as the high quality MiSTer upgraded 4 amp power supply.

✅ 1 Meter Long Cable
✅ 3 Pin UK Moulded Plug
✅ 5A Fused For 240V
✅ Lead End Straight IEC C13 Jack
✅ British Standards Approved BS-1363 & CE Certification

External LED & Button Extensions

Nat — Mon, 10 Aug 2020 19:21:38 +0000

Building a custom case to house your MiSTer? If you need to add external push buttons and LEDs this pair of extension leads allows you to remotely mount buttons and LEDs. The pair of leads connect to the 5 pin and 7 pin header sockets on MiSTer Digital and Analog IO boards.

The circuit diagrams for wiring the P3 and P4 connectors on the IO boards are available in the MiSTer Hardware GitHub. See here for the Analog IO Board v6.1 the AV Pro IO Board v9.2 and the Digital IO Board v1.2

✅ Double Ended High Quality Connectors
✅ Pair of Leads 5 Pin & 7 Pin
✅ Pair of Sockets 5 Pin & 7 Pin
✅ 20cm or 30cm Lead Lengths

MiSTer USB Bridge Short Connectors

Nat — Mon, 10 Aug 2020 15:43:04 +0000

Perfect for connecting your MiSTer setup to a USB hub or BlisSTer board, the USB bridge connector offers a clean solution via two short Micro USB connectors, one plugs into the DE10-Nano’s Micro USB socket and the other plugs into the Micro USB socket on the BlisSTer board or official MiSTer USB Hub.

✅ Suitable For Official MiSTer USB Hubs
✅ Suitable For All BlisSTer Board Versions
✅ Short Micro USB Connectors

MiSTer Male to Male DC Jack Link Cable

Nat — Sat, 16 May 2020 22:12:10 +0000

A male DC jack to male DC jack jumper cable, this is perfect for use with a MiSTer Digital IO board allowing for powering of the USB Hub directly from the DE10-Nano.

If you are using the Digital I/O MiSTer addon board just connect your DE10-Nano power supply into the Digital IO boards DC power socket, then connect one end of the male jumper cable into the DE10-Nano boards DC power socket and the other male end into the USB Hub’s DC power socket. You can now control all the boards power via the on/off switch on the Digital IO board.

✅ Male To Male DC Power Plugs
✅ High Quality Connectors

MiSTer FPGA Bluetooth Adapter

Nat — Sun, 22 Mar 2020 20:51:20 +0000

A small and compact USB Bluetooth v4.0 dongle suitable for use with the MiSTer FPGA, using the CSR8510 chipset for maximum compatibility. Connect a number of devices simultaneously, the Bluetooth adapter also supports full backward compatibility with Bluetooth versions 2.0, 2.1 and 3.0 devices.

The MiSTer Bluetooth adapter works with many popular Bluetooth based controllers including the Sony PlayStation DualShock 3, Sony PlayStation DualShock 4, Nintendo Wii Remote (Wiimote), Nintendo Wii U Pro, Nintendo Switch Pro Controllers, Xbox One, Xbox One Elite and 8BitDo Bluetooth gaming controllers.

Firstly plug the Bluetooth adapter into a USB port, a powered USB hub is always recommend when using a Bluetooth adapter, then to configure the Bluetooth adapter just run the script bluetooth_pair.sh either from the Menu core on the MiSTer FPGA or via SSH. If configuration has been successful the MiSTer Menu core will display a Bluetooth icon to show Bluetooth is paired and connected.

More information on specific Bluetooth device configuration can be found documented on the MiSTer Wiki Bluetooth page.

✅ Compatible With the MiSTer FPGA
✅ USB 2.0 Interface
✅ Low Power Consumption
✅ Bluetooth V4.0 + EDR V2.1/2.0/3.0

MiSTer FPGA WiFi Adapter

Nat — Sun, 23 Feb 2020 20:08:26 +0000

A compact USB WiFi dongle perfect for use with the MiSTer FPGA.

Firstly plug the WiFi adapter into a USB port, then to configure the WiFi adapter just run the script wifi.sh either from the Menu core on the MiSTer FPGA or via SSH. Reboot the MiSTer once WiFi network configuration has been completed. If configuration has been successful once the MiSTer has rebooted the Menu core will display a WiFi icon to show WiFi is connected.

Manual WiFi configuration can be completed by following the steps documented in the MiSTer Wiki.

✅ Compatible With MiSTer FPGA
✅ USB 2.0 Interface
✅ Data Rate Up To 300Mbps
✅ IEEE 802.11 b/g/n Standards