If the switch settings are not as shown, you can use a wooden toothpick to change the 6 pin DIP switch SW10 on the Terasic DE10-Nano board.
If you are just setting up your MiSTer for the first time, or maybe you are experiencing issues you just can not fathom out. It is always best to check the six on board DIP switches are in the correct positions, remember to make sure you turn off the DE10 Nano before adjusting the switches.
The correct configuration is shown in the images below. Using a wooden cocktail stick for the SW10 DIP switches makes adjustment easy, once done you are ready to power up the DE10-Nano.
MiSTer FPGA DE10 Nano Correct DIP Switch Configuration
If the switch settings are not as shown, you can use a wooden toothpick to change the 6 pin DIP switch SW10 on the Terasic DE10-Nano board.
If you are just setting up your MiSTer for the first time, or maybe you are experiencing issues you just can not fathom out. It is always best to check the six on board DIP switches are in the correct positions, remember to make sure you turn off the DE10 Nano before adjusting the switches.
The correct configuration is shown in the images below. Using a wooden cocktail stick for the SW10 DIP switches makes adjustment easy, once done you are ready to power up the DE10-Nano.